34
$\begingroup$

Suppose that a NN contains $n$ hidden layers, $m$ training examples, $x$ features, and $n_i$ nodes in each layer. What is the time complexity to train this NN using back-propagation?

I have a basic idea about how they find the time complexity of algorithms, but here there are 4 different factors to consider here i.e. iterations, layers, nodes in each layer, training examples, and maybe more factors. I found an answer here but it was not clear enough.

Are there other factors, apart from those I mentioned above, that influence the time complexity of the training algorithm of a NN?

$\endgroup$
1
23
$\begingroup$

I haven't seen an answer from a trusted source, but I'll try to answer this myself, with a simple example (with my current knowledge).

In general, note that training an MLP using back-propagation is usually implemented with matrices.

Time complexity of matrix multiplication

The time complexity of matrix multiplication for $M_{ij} * M_{jk}$ is simply $\mathcal{O}(i*j*k)$.

Notice that we are assuming the simplest multiplication algorithm here: there exist some other algorithms with somewhat better time complexity.

Feedforward pass algorithm

The feedforward propagation algorithm is as follows.

First, to go from layer $i$ to $j$, you do

$$S_j = W_{ji}*Z_i$$

Then you apply the activation function

$$Z_j = f(S_j)$$

If we have $N$ layers (including input and output layer), this will run $N-1$ times.

Example

As an example, let's compute the time complexity for the forward pass algorithm for an MLP with $4$ layers, where $i$ denotes the number of nodes of the input layer, $j$ the number of nodes in the second layer, $k$ the number of nodes in the third layer and $l$ the number of nodes in the output layer.

Since there are $4$ layers, you need $3$ matrices to represent weights between these layers. Let's denote them by $W_{ji}$, $W_{kj}$ and $W_{lk}$, where $W_{ji}$ is a matrix with $j$ rows and $i$ columns ($W_{ji}$ thus contains the weights going from layer $i$ to layer $j$).

Assume you have $t$ training examples. For propagating from layer $i$ to $j$, we have first

$$S_{jt} = W_{ji} * Z_{it}$$

and this operation (i.e. matrix multiplication) has $\mathcal{O}(j*i*t)$ time complexity. Then we apply the activation function

$$ Z_{jt} = f(S_{jt}) $$

and this has $\mathcal{O}(j*t)$ time complexity, because it is an element-wise operation.

So, in total, we have

$$\mathcal{O}(j*i*t + j*t) = \mathcal{O}(j*t*(i + 1)) = \mathcal{O}(j*i*t)$$

Using same logic, for going $j \to k$, we have $\mathcal{O}(k*j*t)$, and, for $k \to l$, we have $\mathcal{O}(l*k*t)$.

In total, the time complexity for feedforward propagation will be

$$\mathcal{O}(j*i*t + k*j*t + l*k*t) = \mathcal{O}(t*(ij + jk + kl))$$

I'm not sure if this can be simplified further or not. Maybe it's just $\mathcal{O}(t*i*j*k*l)$, but I'm not sure.

Back-propagation algorithm

The back-propagation algorithm proceeds as follows. Starting from the output layer $l \to k$, we compute the error signal, $E_{lt}$, a matrix containing the error signals for nodes at layer $l$

$$ E_{lt} = f'(S_{lt}) \odot {(Z_{lt} - O_{lt})} $$

where $\odot$ means element-wise multiplication. Note that $E_{lt}$ has $l$ rows and $t$ columns: it simply means each column is the error signal for training example $t$.

We then compute the "delta weights", $D_{lk} \in \mathbb{R}^{l \times k}$ (between layer $l$ and layer $k$)

$$ D_{lk} = E_{lt} * Z_{tk} $$

where $Z_{tk}$ is the transpose of $Z_{kt}$.

We then adjust the weights

$$ W_{lk} = W_{lk} - D_{lk} $$

For $l \to k$, we thus have the time complexity $\mathcal{O}(lt + lt + ltk + lk) = \mathcal{O}(l*t*k)$.

Now, going back from $k \to j$. We first have

$$ E_{kt} = f'(S_{kt}) \odot (W_{kl} * E_{lt}) $$

Then

$$ D_{kj} = E_{kt} * Z_{tj} $$

And then

$$W_{kj} = W_{kj} - D_{kj}$$

where $W_{kl}$ is the transpose of $W_{lk}$. For $k \to j$, we have the time complexity $\mathcal{O}(kt + klt + ktj + kj) = \mathcal{O}(k*t(l+j))$.

And finally, for $j \to i$, we have $\mathcal{O}(j*t(k+i))$. In total, we have

$$\mathcal{O}(ltk + tk(l + j) + tj (k + i)) = \mathcal{O}(t*(lk + kj + ji))$$

which is the same as the feedforward pass algorithm. Since they are the same, the total time complexity for one epoch will be $$O(t*(ij + jk + kl)).$$

This time complexity is then multiplied by the number of iterations (epochs). So, we have $$O(n*t*(ij + jk + kl)),$$ where $n$ is number of iterations.

Notes

Note that these matrix operations can greatly be parallelized by GPUs.

Conclusion

We tried to find the time complexity for training a neural network that has 4 layers with respectively $i$, $j$, $k$ and $l$ nodes, with $t$ training examples and $n$ epochs. The result was $\mathcal{O}(nt*(ij + jk + kl))$.

We assumed the simplest form of matrix multiplication that has cubic time complexity. We used the batch gradient descent algorithm. The results for stochastic and mini-batch gradient descent should be the same. (Let me know if you think the otherwise: note that batch gradient descent is the general form, with little modification, it becomes stochastic or mini-batch)

Also, if you use momentum optimization, you will have the same time complexity, because the extra matrix operations required are all element-wise operations, hence they will not affect the time complexity of the algorithm.

I'm not sure what the results would be using other optimizers such as RMSprop.

Sources

The following article http://briandolhansky.com/blog/2014/10/30/artificial-neural-networks-matrix-form-part-5 describes an implementation using matrices. Although this implementation is using "row major", the time complexity is not affected by this.

If you're not familiar with back-propagation, check this article:

http://briandolhansky.com/blog/2013/9/27/artificial-neural-networks-backpropagation-part-4

$\endgroup$
1
  • $\begingroup$ So polynomial-ish $\endgroup$
    – Jonah
    Sep 10 at 4:51
5
$\begingroup$

For the evaluation of a single pattern, you need to process all weights and all neurons. Given that every neuron has at least one weight, we can ignore them, and have $\mathcal{O}(w)$ where $w$ is the number of weights, i.e., $n * n_i$, assuming full connectivity between your layers.

The back-propagation has the same complexity as the forward evaluation (just look at the formula).

So, the complexity for learning $m$ examples, where each gets repeated $e$ times, is $\mathcal{O}(w*m*e)$.

The bad news is that there's no formula telling you what number of epochs $e$ you need.

$\endgroup$
3
  • $\begingroup$ From the above answer don't you think itdepends on more factors? $\endgroup$
    – user9947
    Mar 20 '18 at 11:00
  • 1
    $\begingroup$ @DuttaA No. There's a constant amount of work per weight, which gets repeated e times for each of m examples. I didn't bother to compute the number of weights, I guess, that's the difference. $\endgroup$
    – maaartinus
    Mar 20 '18 at 13:50
  • 2
    $\begingroup$ I think the answers are same. in my answer I can assume number of weights w = ij + jk + kl. basically sum of n * n_i between layers as you noted. $\endgroup$ Mar 24 '18 at 10:01
2
$\begingroup$

A potential disadvantage of gradient-based methods is that they head for the nearest minimum, which is usually not the global minimum.

This means that the only difference between these search methods is the speed with which solutions are obtained, and not the nature of those solutions.

An important consideration is time complexity, which is the rate at which the time required to find a solution increases with the number of parameters (weights). In short, the time complexities of a range of different gradient-based methods (including second-order methods) seem to be similar.

Six different error functions exhibit a median run-time order of approximately O(N to the power 4) on the N-2-N encoder in this paper:

Lister, R and Stone J "An Empirical Study of the Time Complexity of Various Error Functions with Conjugate Gradient Back Propagation" , IEEE International Conference on Artificial Neural Networks (ICNN95), Perth, Australia, Nov 27-Dec 1, 1995.

Summarised from my book: Artificial Intelligence Engines: A Tutorial Introduction to the Mathematics of Deep Learning.

$\endgroup$
0
2
$\begingroup$

I found a paper that gives a table of time complexities for different architectures using linear programming-based training: https://arxiv.org/abs/1810.03218

$\endgroup$
1
  • $\begingroup$ Hi and welcome to AI SE! Thanks for contributing! Maybe you can elaborate a little more about the table, and include a screenshot of it if you don't want to summarise the results! $\endgroup$
    – nbro
    Mar 27 '20 at 19:07

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy